Medical Oxygen Outlet O2, DIN 13260-2 Type
Brand - Silbermann, LLC
Silbermann design and manufacture Medical Gas Outlets (Terminal Units) to last and to ensure a constant and reliable medical gas flow for the patient and the medical equipment.
To meet the diverse engineering needs of medical facilities, the company manufactures three types of DIN 13260-2 outlets depending on the installation method:
● Recessed (Wall) — for flush mounting directly into the wall.
● Exposed — for quick installation on the wall surface.
● Panel Mounted — for integration into bed head units and medical consoles.
All outlets are 100 % tested for flow, leakage and are cleaned for oxygen services prior to shipping.
Silbermann outlets are designed by industrial designers to ensure an appealing and pleasant environment for the patient and the medical staff.
To connect equipment, you can select and purchase compatible adapters and plugs.
Accepts DIN 13260-2 gas specific adapters.
All medical gas outlets are 100% hydrostatic tested for leaks. The outlets are factory assembled, degreased and cleaned for medical gas service.
Indexed to eliminate interchangeability of gas services.
360° swivel inlet pipe for ease of installation.
Double position allowing parking of male adapter in the outlet.
Low maintenance due to use of VITON seals in front assembly (latch value).
Medical Gas System Standards: NFPA99 & EN ISO 7396-1 requirements.
Applicable Standards: ISO 9170-1, DIN 13260-2.
Silbermann's Quality Management System: CE marked by the notiied body TÜV-SÜD.
The medical gas outlet shall be SILBERMANN DIN type manufactured according to ISO 9170-1 DIN 13260-2.
The outlet shall be gas specific by indexing each front service panel to a gas specific pin indexed rough-in module.
The outlet of positive and negative pressure shall consist of a primary and secondary check valves to allow testing and on-line maintenance.
Outlet shall be manufactured with 175 mm long, type K, 12.7 mm (1/2”) OD copper pipe. Rough-in pipe shall be silver brazed to the outlet body.
With the rough-in mounted, the outlet shall be depth adjustable to compensate for various wall thicknesses.
The quick connect outlet shall comply with ISO 9170-1 standard type and accept only corresponding DIN 13260-2 Gas Specific Adapter.
Pressure drop of less than 20 Kpa through the outlet at 120 LPM and 350 Kpa (3.5 Bar) inlet pressure.
When fully open, the outlet allows a flow of up to 600 LPM and pressure of 400 KPa (4 Bars).
